Skip to main content
ABI brake inspection camera unit

ABI – Automatic Brake Inspection

ABI (Automatic Brake Inspection) measures brake pads and other underfloor components of rail vehicles fully automatically, while the train passes at line speed or enters the maintenance depot. Every measurement is stored with the vehicle and axle, so wear can be followed over time and pads are replaced when needed – not too early and not too late. ABI is the basis for predictive maintenance of brakes.

ABI – Brake Inspection

Key features

Brake thickness

Measures pad and disc thickness of every axle-mounted disc brake with an accuracy of up to 0.5 mm – up to six brakes per axle.

High-speed inspection

Inspects trains in passing at up to 120 km/h or at the depot entrance – no stop, no staff in the track.

Wear trends

Every measurement is stored per vehicle and axle; the wear trend shows when each pad really needs replacing.

Maintenance alerts

Limit values raise alarms in your maintenance and alerting systems, e.g. SAP or an SMS gateway.

Delivery and service

ITTHCore architecture, all software (developed in-house), optics and illumination concept, technical decisions, troubleshooting, updates and further development.
PartnersInstallation, system integration, site work and local service – under responsibilities agreed for each project.

Our responsibility does not end when a system is commissioned. We have supported demanding customer installations over many years, combining deep knowledge of the core technology with project-specific service arrangements and integration partners. Responsibilities, response channels and escalation paths are defined for each installation and contract.

Key figures

  • Measuring accuracy up to 0.5 mm
  • Vehicle speed up to 120 km/h
  • 6 to 10 cameras per installation, infrared or white light
  • Complete history and wear trend for every brake
  • Full TCP/IP for all components, no proprietary interfaces
  • Server/client architecture, multiple workstations, central database
  • Alarms and interfaces to process and alerting systems, e.g. SAP or SMS gateway

Supported brake types

Brake typeStatus
Axle-mounted disc brakefully supported, up to 6 brakes per axle
Wheel-mounted disc brakein development
Tread brake (brake block)on request

Infrared or white light

Infrared gives stable, high-contrast images independent of daylight and weather, works at night and is invisible to the human eye – the usual choice for AI-based analysis. White light adds colour information and fine detail for visual checks by staff.

From camera image to measurement

ABI infrared image of a disc brake, raw and analysed
Left: infrared image of a disc brake, recorded at line speed. Right: the same image after analysis – the brake components are recognised and colour-coded, and the pad thickness is measured (red marker).

Installation variants

Each variant is available as a centre track module or as an outer module beside the rail.

VariantLocationWasherOpening coverHeating
PBL-01Depot entrance–––
PBL-02Depot entrance–●–
PBL-03In track–––
PBL-04In track–●–
PBL-05In track●●–
PBL-06In track●●●

Identification and track requirements

  • Trains are identified by trackside RFID readers; an optical identification system is available as an option.
  • A Frauscher axle counter triggers each measurement reliably.
  • Processing runs in a control cabinet or 19″ rack up to 500 m from the trackside scanner.
  • In-track variants need a straight section of 10 m (one direction) or 20 m (both directions); standard wooden sleepers are drilled, special sleepers on request. All clearance gauges are kept.
  • Self-monitoring of all components is part of every system.

Technology

Latest-generation industrial cameras, purpose-built high-power illumination for high speeds, custom housings designed against water and moisture, oil-resistant and waterproof cables and connectors. The analysis software uses current AI image processing and is robust against dirt, dust and fluids.

Options

  • Surveillance and service cameras for the site
  • Full underbody scan of every vehicle
  • Audio recording for acoustic diagnosis
Underbody scan of a wagon
Underbody scan of a wagon

In operation and approved

ABI is in operation in Denmark and Germany and is approved by DB InfraGO and the German Federal Railway Authority (Eisenbahn-Bundesamt, EBA). In Denmark ABI is distributed by our partner Aarsleff Rail.

Request an ABI offer

Tell us your fleet, the brake type, line speed and the planned location (depot entrance or main track). We give you a technical answer within two working days; a concept and a quotation follow once the requirements are clear.